Maryland FHA Loan Requirements (2026 Guide)

2026 FHA Loan Limits in Maryland

The Federal Housing Administration sets county-level FHA loan limits each calendar year based on local median home prices. For 2026, every U.S. county falls into one of three tiers: the national ‘floor’ of $541,287 for a one-unit property, the national ‘ceiling’ of $1,249,125 in high-cost areas, or a ‘between’ tier set at 115% of the local median home price. Here is how Maryland’s counties fall across those tiers.

Maryland contains 5 counties that hit the high-cost ceiling, including Montgomery, Prince George’s, Frederick, Charles, Calvert. These counties qualify for the maximum FHA loan amount of $1,249,125 for a single-family home — the same upper limit as Manhattan or downtown San Francisco.

Most Maryland metropolitan counties sit in the ‘between’ tier, where limits scale with the local median home price. Howard County, for example, has a 2026 single-family FHA limit of $632,500.

Limits scale up for multi-unit properties: a 4-unit property in a ceiling county can borrow up to $2,402,625, while a 4-unit property in a floor county is capped at $1,041,125. Always confirm your specific county’s limit with HUD’s lookup tool before making an offer.

FHA Requirements for Maryland Borrowers

FHA sets its core eligibility rules at the federal level through HUD, so a Maryland borrower meets the same baseline criteria as a borrower in any other state. What changes from state to state is how those rules interact with local home prices, property taxes, and the down payment assistance offered by Maryland Department of Housing and Community Development (DHCD) — Maryland Mortgage Program. Here is how the FHA requirements apply specifically in Maryland:

• Credit score: FHA allows 580 for 3.5% down (or 500-579 with 10% down), but most Maryland lenders apply an overlay around 620-640 for automated approval. If your score sits between 580 and 620, look for a Maryland lenders that manually underwrites FHA files. If your credit is the hurdle, our guide on how to buy a house with bad credit walks through the options.
• Down payment: 3.5% of the purchase price. On a home at Maryland’s statewide median of $430,000, that is roughly $15,050 — and Maryland Mortgage Program assistance (covered below) can reduce or eliminate that cash requirement entirely.
• Debt-to-income ratio: Generally a 43% back-end maximum, with flexibility to 56.99% under FHA manual underwriting when compensating factors exist. As a rough illustration, a $430,000 Maryland purchase with the full housing payment plus typical consumer debt would call for a household income in the neighborhood of $8,625 to stay inside the standard ratio — your actual number depends on rate, taxes, and existing debt.
• Employment history: Two years of documented work in the same field (recent graduates and career-changers can qualify with a documented path to stable income).
• Occupancy: Primary residence only — you must move in within 60 days of closing and live there at least a year. This rules out Maryland vacation and investment properties unless you occupy one unit of a 2-4 unit building.
• Property condition: The home must pass an FHA appraisal covering both market value and HUD minimum property standards — a more common sticking point on older Maryland housing stock than on newer construction.

Maryland Down Payment Assistance Through Maryland Mortgage Program

Maryland Department of Housing and Community Development (DHCD) — Maryland Mortgage Program runs the state’s primary down payment assistance (DPA) programs. Most pair directly with FHA first mortgages and can dramatically reduce the out-of-pocket cash needed to close.

• Maryland Mortgage Program (MMP) 1st Time Advantage with DPA: Down payment assistance delivered as a deferred 0% second loan (commonly $6,000 or a percentage of the loan amount), repaid only when the home is sold, refinanced, or paid off. Pairs with an MMP FHA, VA, USDA, or conventional first mortgage.
• Maryland SmartBuy 3.0: For buyers carrying student debt: financing that pays off up to 15% of the home purchase price in student loan debt (max $50,000) as part of the home loan, available with MMP first mortgages on eligible homes.
• Maryland DHCD Partner Match / Down Payment Assistance Booster: Matching funds from participating employers, builders, and community organizations that stack on top of MMP base down payment assistance, increasing total available help for qualifying buyers.

DPA programs have eligibility rules layered on top of FHA’s underwriting requirements — typically income limits tied to area median income, purchase price caps, first-time buyer requirements (with some exceptions), and homebuyer education courses. Check current eligibility on the Maryland Mortgage Program website before assuming you qualify.

Maryland Property Tax, Insurance, and Closing Cost Context

Maryland property taxes are moderate — effective rates run 1.0% to 1.3% statewide, with a state Homestead Tax Credit that caps annual taxable assessment increases on owner-occupied homes (commonly at 10% or less, lower in some counties). Maryland also offers the Homeowners’ Property Tax Credit for income-eligible owners. Homeowners insurance is moderate inland but rises along the Chesapeake Bay and Atlantic coast (Worcester County / Ocean City) where flood and wind exposure increase premiums.

FHA underwriting evaluates your full housing payment — principal, interest, taxes, insurance, mortgage insurance, and any HOA dues (PITI+MI+HOA) — against your gross monthly income. In Maryland, the tax and insurance components can shift your qualifying loan amount significantly, so get binding quotes for both early in the process.

Closing costs in Maryland typically run 2% to 5% of the purchase price and include lender origination fees, title insurance (lender’s policy required, owner’s policy strongly recommended), appraisal ($600-$900 in most markets), recording fees, prepaid taxes and insurance for the escrow account, and the first month of mortgage insurance. FHA allows the seller to contribute up to 6% of the purchase price toward your closing costs — this is a major negotiating lever in slower markets and one of the most underused buyer-side tactics in Maryland real estate transactions.

FHA vs Conventional in Maryland

FHA is not always the right answer in Maryland, even for buyers who qualify. Conventional loans with 3% down (Fannie Mae HomeReady, Freddie Mac Home Possible) can sometimes win for borrowers with strong credit (700+) because conventional private mortgage insurance (PMI) auto-cancels at 78% loan-to-value, while FHA MIP at the standard 3.5% down structure stays for the life of the loan. Over a 7-10 year holding period, that difference can total $15,000 to $40,000 in extra costs on a Maryland purchase at the state median price.

That said, FHA usually wins in three scenarios: credit scores below 680, debt-to-income ratios above 43%, and buyers who need the most flexible underwriting (non-traditional credit, recent credit events, irregular income sources). FHA also typically offers lower rates than conventional at the same credit profile in the sub-700 FICO range.

The best approach for most Maryland buyers: get quotes for both FHA and conventional from the same lender, compare the 5-year and 10-year total cost of each, and choose based on how long you plan to stay in the home.

FHA Mortgage Insurance Explained for Maryland Buyers

FHA loans carry two separate mortgage insurance components, both paid by the borrower. Using Maryland’s statewide median price of $430,000 as a working example with the minimum 3.5% down (a base loan of $414,950):

• Upfront premium (UFMIP): 1.75% of the base loan — about $7,261 on this Maryland example — almost always financed into the loan rather than paid in cash, bringing the financed balance to roughly $422,211.
• Annual premium (MIP): 0.15% to 0.75% of the balance, paid monthly. At the typical 0.55% for a 30-year FHA loan at 3.5% down, that adds about $193 per month to this Maryland buyer’s payment.

The decisive difference between FHA MIP and conventional PMI: at the standard 3.5% down structure, FHA MIP stays for the life of the loan, while conventional PMI automatically cancels at 78% loan-to-value. For a Maryland buyer, that life-of-loan cost is the main reason to compare FHA against a low-down-payment conventional option — see our FHA vs conventional comparison for the full cost breakdown. Many Maryland FHA borrowers refinance into a conventional loan 2-5 years after purchase, once they have equity and stronger credit, to shed MIP and often lower their rate.

How to Apply for an FHA Loan in Maryland

1. Check your credit. Pull your FICO scores from AnnualCreditReport.com. If you’re below 580, work on improving your score before applying — the difference between 579 and 580 is the difference between 10% down and 3.5% down.
2. Get pre-approved. A pre-approval letter from an FHA-approved lender confirms your maximum purchase price and signals to sellers that you’re a serious buyer.
3. Choose a property. The home must meet FHA’s minimum property standards. Most move-in-ready homes pass; properties with significant deferred maintenance, safety issues, or major structural problems may not.
4. Order the FHA appraisal. Unlike conventional appraisals, FHA appraisals also evaluate the property’s condition. Issues flagged by the appraiser must be repaired before closing.
5. Close the loan. Bring 3.5% down (or use DPA to reduce or eliminate that), pay closing costs (often partially funded by seller credits), and move in within 60 days.

Herring Bank is a direct FHA-approved lender (NMLS #415783) licensed to originate mortgages in all 50 states. Maryland FHA borrowers can start pre-approval online or by calling 1-214-225-3166 to speak with a mortgage specialist. Buying near a state line? Compare FHA requirements in neighboring Virginia and Pennsylvania.